|
Product Catalog
SR-15 / SR-25
|
Description
|
|
|
The SR-15 restores power on underground
secondary services, when the Customer has lost on Phase or
neutral. The remaining good Phase will be used, to provide the
customer immediately with two phases back to his meter.
This will be done using an Auto-Transformer and a Circuit
Breaker Box with a 100A/125A breaker.
Available for Ringless or Ring meter bases.
NEW: LP Extender
convert a ringless meter base
adapter in to a ring meter base adapter!
NEW!
Do you need a 400A
meter pan connection?
Call us....
|
|
|
Description
|
|
|
The System 15/25P is the latest state-of-the art
portable Fault Locating System for power cables.
It combines a thumper/filter (coupler) built
in a sturdy, waterproof NEMA 12 enclosure.
The system is designed for fault locating on
loop-feed systems, where portability and flexibility is
required.
800/1125 joules (W/s) of energy at 15kV(12.5/25kV), makes the
job easy, even on longer cable sections
The Radar is removable and can be used
stand-alone on secondary / street light applications.
Four modes of operations are built-in:
* Radar mode
* Direct thump mode
* DC testing (Hipot)
* Burn mode
NEW:
12.5kV /
25kV 1125 available!
|
|
|
Description
|
|
|
The DCR-3 Digital Cable Radar for power cables.
Easy to use, even for the inexperienced user
and does not require special training.
Only one setting (cable propagation velocity)
needs to be made to get the DCR-3 ready for the Thump.
NEW: APF
mode (automatic peak finder) will find your cable end
automatically, right after the connection has been made.
If your cable end is outside of the desired
range setting, APF will quickly change your range and end
marker, to move the cable end within the visible area of your
screen.
Available with 8.4"
or 10.4" LCD screen in the same package!
Optional: Mobile
power Pack.
NEW:
"Text-only" version
available!
Small package (7"x4"x5").
Battery powered (Lithium Batt.)
LCD 128x64 graphics/text
Operation modes:
- text only
- real-time-trace
Call for info....
|
|
|
Description
|
|
|
The Thunderbolt is designed to find sheath
faults on power cables e.g. primary, secondary, street light and
also coated water/gas/oil pipes.
The Transmitter generates a high voltage
pulse (up to 1.5kV) in to the cable under test.
The receiver, with a centered meter, is used in conjunction with
two independent spikes, to locate the fault.
The Thunderbolt combines a
battery powered receiver and an AC powered transmitter, built in
to a sturdy carrying case.
The AC Input is GFCI protected.
|
|
|
Description
|
|
|
The Minisystem is a compact, lightweight
Fault Locating System for installation in utility vehicles.
It combines a thumper and a separation Filter
built in to a small package.
All functions e.g. voltage setting, operating
modes, Radar or direct mode are computer controlled.
The control unit can be mounted anywhere
inside the vehicle within 10' from the high voltage unit.
Constant Energy:
0 ... 6kV, 1000(2000) Joule
0 ... 12kV, 1000(2000) Joule
0 ... 24kV, 1000(2000) Joule
Thump rate 5 .. 10s (adjustable)
DC testing up to 24kV
Burning up to 24kV / 100mA
Optional: 40kV DC-HiPot with Insulation test
Minisystem
II
0 ... 8kV, 1000(2000) Joule
0 ... 16kV, 1000(2000) Joule
0 ... 32kV, 1000(2000) Joule
Thump rate 5 .. 10s (adjustable)
DC testing up to 32kV
|
|
|
Description
|
|
The Cable Identification Set
allows to identify/select a single cable out of a bundle.
A transmitter, connected to the
cable under test, transmits unipolar current pulses in to the
cable.
A flexible current probe, connected to the receiver, detects
these current pulses and compares intensity and polarity.
High impulse current up to 55A
Power requirements:
- external AC
- external 12V DC
- internal Battery
Small, lightweight receiver.
Adjustable sensitivity.
Impedance matching for standard current probes (clamp-on) or
flexible probes.
Carrying case.
|
|
FlashPhone |
Description |
|
|
The FlashPhone is
designed to Pinpoint the exact location of a flashover, created
by an impulse generator (Thumper).
A combination of Seismic and
electronic sensor technology, plus Microcomputer technology with
Digital Signal Processing, makes the FlashPhone unique.
A large graphic liquid crystal
display gives the user all information e.g.
- time delay between
acoustic/electromagnetic pulse
- battery status
- digital filters
- Headset ON/OFF
- Backlight ON/OFF
Power requirements:
Lithium-Polymer battery
(Re-chargeable)
Battery charger included
|
|
 
|
